Remanufactured Slitters & Industrial Cutting Machines in Weeki Wachee, FL
Imperial Sewing Machines Co, Inc. supplies remanufactured slitters and industrial cutting machines to businesses that cut fabric into strips, bias strips, and trim. Our inventory includes Judelsohn 320, 340, and 360 slitters, the Towers Slitter, the American Slitter, and the Ace Strip Cutter with digital controls. Remanufactured cutting equipment gives your operation established machine designs at a lower cost than new equipment. From our office at 11136 Sage Thrasher Ave., Weeki Wachee, FL 34614, we help you match the slitter to your material, strip width, and production volume.
Call (973) 445-9699
to Get Pricing on Remanufactured Slitters in Weeki Wachee, FL
Industrial Pleating Machines, Slitters, and Winders in Irvington, NJ
OUR PRODUCTS
Remanufactured Industrial Slitters
An industrial slitter cuts fabric into narrow strips using a rotating circular knife. Slitters are used to produce bias binding, piping, strip trim, and other narrow goods from wider material. In a production line, the slitter often feeds a winder that rolls the finished strips onto cores.
Why Remanufactured Slitters Make Sense
Many of the slitters used in textile production are established designs that are no longer manufactured new. Remanufactured units let businesses keep using these proven machines. They also cost less than new industrial cutting equipment, which makes it practical to add cutting capacity or replace a worn machine.
Knife Size and Cutting Capacity
Slitters are commonly identified by knife diameter. Our current slitters have 12-inch and 15-inch knives. Knife size affects the material a machine is suited to and how it performs in production.
Request Pricing on Remanufactured Industrial Slitters in Weeki Wachee, FL
Industrial Pleating Machines, Slitters, and Winders in Irvington, NJ
What Is a Remanufactured Slitter?
A remanufactured slitter is a used cutting machine that has been rebuilt to return it to working condition for further production use. Remanufacturing generally involves more extensive work than a basic repair. Buying remanufactured gives you a working machine built on a proven design without the cost of new equipment.
Remanufactured vs. Used As-Is
A used as-is machine is sold in whatever condition it is found. A remanufactured slitter has been rebuilt before sale, so you are not taking on an unknown repair project. See the Remanufacturing Process section below for the work Imperial performs.
Ask Imperial Sewing Machines Co, Inc.
What Goes Into a Remanufactured Slitter in Weeki Wachee, FL
Industrial Pleating Machines, Slitters, and Winders in Irvington, NJ
Slitter Models
Inventory changes as machines are sold. Contact us to confirm current availability on any model.
Industrial Pleating Machines, Slitters, and Winders in Irvington, NJ
Pleating Machine Parts
We stock the parts that wear out on pleating equipment. These include blades, knives, combs, springs, and bands for crystal pleating machines. We also carry Nomex covers for Mutual and Chandler combination pleating machines, shirring springs for bubble pleating machines, blades for Mutual push-up machines, and heating elements. Having the right part on hand gets a stalled machine back into production without replacing the whole unit.
Push-up pleating machines use blades to push fabric into folds. Mutual push-up machines are a common example, and we carry replacement blades for them.
Push-Up Pleating Machines
Bubble pleating machines create a gathered, textured effect rather than flat pleats. For bubble pleating machines, we carry shirring springs.
Bubble Pleating Machine Parts
Heating elements are used across pleating machinery to set pleats. Because heating elements vary by machine, contact us with your equipment details so we can confirm the correct replacement.
Heating Elements for Pleating Equipment
Judelsohn 360 Slitter
The Judelsohn 360 Slitter uses a 15-inch knife. It is a remanufactured slitter for strip and bias cutting in commercial production.
Judelsohn 320 Slitter
The Judelsohn 320 Slitter uses a 12-inch knife. Businesses that also need winding capacity can ask about the related Judelsohn 320W Winding and Cutting Machine.
Judelsohn 340 Slitter
The Judelsohn 340 Slitter uses a 12-inch knife and is offered as a remanufactured cutting machine for strip production.
Towers Slitter
The Towers Slitter uses a 15-inch knife. It is a remanufactured slitter for businesses cutting fabric into strips.
American Slitter
The American Slitter uses a 15-inch diameter knife and is offered remanufactured for strip cutting applications.
Ace Strip Cutter
The Ace Strip Cutter handles a 10-inch width and has digital controls. Digital controls allow precise setting of cutting parameters for repeatable strip production.
Industrial Pleating Machines, Slitters, and Winders in Irvington, NJ
Additional Cutting Equipment
We also carry combination equipment that cuts and winds. This includes the Utica Heavy Duty Combination Cutting and Winding Machine and the Cameron Slitter and Winder, as well as bias sewing and cutting units. See our Remanufactured Winders page for winding equipment.
Call (973) 445-9699
to Confirm Availability on Judelsohn, Towers, American, and Ace Slitters
Equipment Type
Tell us whether you are asking about a pleating machine, a collander machine, a slitter, a winder, or a combination cutting and winding unit.
Imperial Sewing Machine Co. Inc. is located at 584 S 21st St, Irvington, NJ 07111, in Essex County. Business customers in New Jersey and the New York metro area are welcome to visit and see equipment in person. Call ahead to confirm the machine you want to see is available. We also work with customers outside the region by phone, email, and fax.
Call Ahead to Visit Imperial Sewing Machine at 584 S 21st St in Irvington, NJ
Location
Slitter Applications
Industrial slitters are used anywhere fabric must be cut into consistent narrow strips at production volume.
Bias Binding and Bias Tape
Bias strips are cut at an angle to the grain of the fabric, which gives them stretch for binding curved edges. Slitters used for bias cutting produce the strips that become bias binding and bias tape.
Piping and Cording
Piping manufacturers cut fabric strips to wrap around cord for upholstery, apparel, and home décor. Uniform strip width keeps piping consistent.
Strip Trim and Narrow Goods
Trim producers use slitters to cut decorative and functional strips for apparel, costumes, and décor items.
Upholstery and Home Décor
Upholstery and drapery manufacturers cut strips for welting, banding, and edge finishing.
Feeding Winding Operations
Many shops run a slitter ahead of a winder so cut strips are rolled onto cores for storage, shipping, or the next production step.
Tell Us Your Application to Find the Right Industrial Slitter in Weeki Wachee, FL
Get Pricing on Remanufactured Slitters, Winders, and Collander Machines in Irvington, NJ
Remanufacturing Process
Every remanufactured slitter from Imperial Sewing Machines Co, Inc. goes through the following work before it is offered for sale.
Call (973) 445-9699 to Ask About the Remanufacturing Work on a Specific Slitter
Choosing an Industrial Slitter
The right slitter depends on your material, your strip requirements, and your volume.
Strip Width and Precision
Confirm that the machine can cut the strip widths you produce and hold the tolerance your products require.
Knife Size
Consider whether a 12-inch or 15-inch knife suits your material and production. Ask us which models fit your application.
Material Type
Fabric weight, thickness, and fiber content affect cutting performance. Tell us what you cut so we can recommend a suitable machine.
Bias or Straight Cutting
If you produce bias binding or bias tape, confirm the machine is set up for bias cutting.
Manual or Digital Controls
Digital controls, like those on the Ace Strip Cutter, allow precise, repeatable settings. Traditional machines may suit shops that already know their setups.
Downstream Equipment
If your strips go directly to winding, consider a combination cutting and winding machine or a slitter that pairs with your existing winder.
Speak With Imperial Sewing Machines Co, Inc. About Choosing an Industrial Slitter in Weeki Wachee, FL
Request Information
Remanufactured slitters are not sold through online checkout. Our staff confirms pricing, specifications, and availability directly with you. Call (973) 445-9699, email philip@imperialsewingmachine.com, or use the contact form on our website. Include the model you are interested in, your material, strip widths, and production volume. We accept Visa, MasterCard, American Express, Discover, debit cards, and PayPal. Business customers can visit us at 11136 Sage Thrasher Ave., Weeki Wachee, FL 34614.
Call (973) 445-9699 Today to Request Pricing on Remanufactured Slitters in Weeki Wachee, FL
Frequently Asked Questions About Remanufactured Slitters
What is an industrial slitter?
An industrial slitter is a cutting machine that uses a rotating circular knife to cut fabric into narrow strips. It is used to produce bias binding, piping, strip trim, and other narrow goods.
What is a remanufactured slitter?
A remanufactured slitter is a used cutting machine rebuilt to working condition for further production use. It costs less than new equipment and uses an established machine design.
What slitter models does Imperial Sewing Machine carry?
Our catalog includes the Judelsohn 320, 340, and 360 slitters, the Towers Slitter, the American Slitter, and the Ace Strip Cutter. Contact us to confirm current availability.
What knife sizes are available?
The Judelsohn 360, Towers Slitter, and American Slitter use 15-inch knives. The Judelsohn 320 and 340 use 12-inch knives. The Ace Strip Cutter handles a 10-inch width.
What is the Ace Strip Cutter?
The Ace Strip Cutter is a strip cutting machine with a 10-inch width and digital controls for precise, repeatable settings.
What is a bias slitter used for?
A bias slitter cuts fabric strips at an angle to the grain. Bias strips stretch, which makes them suited to binding curved edges as bias binding or bias tape.
What products are made with industrial slitters?
Industrial slitters are used to make bias binding, bias tape, piping, welting, strip trim, and other narrow textile goods.
Can a slitter be paired with a winder?
Yes. Many shops run a slitter ahead of a winder. We also carry combination machines such as the Utica Heavy Duty Combination Cutting and Winding Machine and the Cameron Slitter and Winder.
How do I choose the right slitter?
Consider strip width and precision, knife size, material type, whether you cut bias or straight strips, manual or digital controls, and how the slitter fits with your winding equipment.
Can I buy a slitter directly on the website?
No. All purchases are handled directly with our staff. Contact us by phone, email, or the contact form to begin.
Can I see a slitter in person before buying?
Yes. Business customers can visit 11136 Sage Thrasher Ave., Weeki Wachee, FL 34614. Call ahead to confirm the machine you want to see is available.
What payment methods does Imperial accept?
We accept Visa, MasterCard, American Express, Discover, debit cards, and PayPal. We do not accept cryptocurrency.
Contact Imperial Sewing Machines Co, Inc. in Weeki Wachee, FL for Remanufactured Slitter Pricing and Availability
